Thursday, December 20, 2012

Yaesu FT-897D with internal YT-100 antenna tuner

Here are a couple of pictures of my FT-897D with an LDG YT-100 antenna tuner fitted inside.
In the first picture you can see the rear top view of the radio. As you can see, I added a couple of binding posts for wire antennas and a push button to activate the tuner. I also plan on adding another UHF connector for coax-fed antennas in the near future. I am just waiting for the connectors to arrive.
In the second picture, you can see the rear bottom view, with the four phillips screws that hold the tuner board in place. The back cover is raised a couple of milimiters so that the tuner has enough room inside the battery compartment.

5 comments:

  1. Nice job!
    Do You have any space left inside? I wonder if one small 2200mAh Li-pol battery will fit inside next to the tuner.

    ReplyDelete
  2. Yes, a 2200mAh battery fits inside! I will check with a 11.1v 3000mAh one too, which on paper is slightly above the limit and let you know.

    ReplyDelete
  3. Yes, a 2200mAh battery fits inside! I will check with a 11.1v 3000mAh one too, which on paper is slightly above the limit and let you know.

    ReplyDelete
  4. Hi, do have pictures from YT-100 inside the FT-897D?

    de Wolf, oe7ftj

    ReplyDelete
  5. This is brilliant! I did not see an installation video on your Youtube channel, just installation fo the battery. Is it there? 73 Bruce, VA7SGY, in Canada

    ReplyDelete